Hello People
Just got my Verus yesterday and had all day to play with it today. As far as I can see, Snap-On has listened to us and built an excellent tool that will only improve with time! I did have a couple of error messages pop up on me and did experience a freeup condition when I left it recording, paused the recording, shut off the vehicle for about and hour and then went back to the vehicle. This just proves that Microsoft has a hand in this tool. I love the ability to record as long as you want to, (only limited to hard drive space). recorded a 30 minute drive with close to 10,000 frames of data on my 06 GMC Sierra.
I am a little disapointed in the slow refresh rate when connected to Chryslers. It also apears that even though you can select a custom data list, it does not speed up the pid refersh rate. On the 2003 Ram today the data was recorded around one frame every 3 to 4 seconds. I called the Tech Support and they said there was no fix for this yet. When using the Modis or SP you could select a custom data list and the scanner would only refresh those specific pids. This applies to Fords too.
The ability to print to a network printer, surf the web, order parts, access the IATN, Identifix, Shopkey or anything else you might want is awesome! If you get really bored, you can play solitare or Freecell. I am going to put my customer database and invoice system on this laptop. A larger hard drive would also have been better as I have the entire Alldata DVD library on my current laptop and this would be great when the network is not available. I do some mobile diagnostics and there is not usually access to a network.
Bootup time is acceptable and shutdown is fine too. I set up a bluetooth mouse and I think I will buy a blutooth keyboard to free up the USB port. It could have used two or three. I do intend to install some additional software on the tool such as Autoenginuity and PCM Scan. both use a USB interface adapter and would just possible give you some options when and if there is a communication issue with the Verus software. I didn't see the Legacy software anywhere?
Keep up the good work Snap-On!
Just got my Verus yesterday and had all day to play with it today. As far as I can see, Snap-On has listened to us and built an excellent tool that will only improve with time! I did have a couple of error messages pop up on me and did experience a freeup condition when I left it recording, paused the recording, shut off the vehicle for about and hour and then went back to the vehicle. This just proves that Microsoft has a hand in this tool. I love the ability to record as long as you want to, (only limited to hard drive space). recorded a 30 minute drive with close to 10,000 frames of data on my 06 GMC Sierra.
I am a little disapointed in the slow refresh rate when connected to Chryslers. It also apears that even though you can select a custom data list, it does not speed up the pid refersh rate. On the 2003 Ram today the data was recorded around one frame every 3 to 4 seconds. I called the Tech Support and they said there was no fix for this yet. When using the Modis or SP you could select a custom data list and the scanner would only refresh those specific pids. This applies to Fords too.
The ability to print to a network printer, surf the web, order parts, access the IATN, Identifix, Shopkey or anything else you might want is awesome! If you get really bored, you can play solitare or Freecell. I am going to put my customer database and invoice system on this laptop. A larger hard drive would also have been better as I have the entire Alldata DVD library on my current laptop and this would be great when the network is not available. I do some mobile diagnostics and there is not usually access to a network.
Bootup time is acceptable and shutdown is fine too. I set up a bluetooth mouse and I think I will buy a blutooth keyboard to free up the USB port. It could have used two or three. I do intend to install some additional software on the tool such as Autoenginuity and PCM Scan. both use a USB interface adapter and would just possible give you some options when and if there is a communication issue with the Verus software. I didn't see the Legacy software anywhere?
Keep up the good work Snap-On!
Hello People
Just got my Verus yesterday and had all day to play with it today. As far as I can see, Snap-On has listened to us and built an excellent tool that will only improve with time! I did have a couple of error messages pop up on me and did experience a freeup condition when I left it recording, paused the recording, shut off the vehicle for about and hour and then went back to the vehicle. This just proves that Microsoft has a hand in this tool. I love the ability to record as long as you want to, (only limited to hard drive space). recorded a 30 minute drive with close to 10,000 frames of data on my 06 GMC Sierra.
I am a little disapointed in the slow refresh rate when connected to Chryslers. It also apears that even though you can select a custom data list, it does not speed up the pid refersh rate. On the 2003 Ram today the data was recorded around one frame every 3 to 4 seconds. I called the Tech Support and they said there was no fix for this yet. When using the Modis or SP you could select a custom data list and the scanner would only refresh those specific pids. This applies to Fords too.
The ability to print to a network printer, surf the web, order parts, access the IATN, Identifix, Shopkey or anything else you might want is awesome! If you get really bored, you can play solitare or Freecell. I am going to put my customer database and invoice system on this laptop. A larger hard drive would also have been better as I have the entire Alldata DVD library on my current laptop and this would be great when the network is not available. I do some mobile diagnostics and there is not usually access to a network.
Bootup time is acceptable and shutdown is fine too. I set up a bluetooth mouse and I think I will buy a blutooth keyboard to free up the USB port. It could have used two or three. I do intend to install some additional software on the tool such as Autoenginuity and PCM Scan. both use a USB interface adapter and would just possible give you some options when and if there is a communication issue with the Verus software. I didn't see the Legacy software anywhere?
Keep up the good work Snap-On!
Just got my Verus yesterday and had all day to play with it today. As far as I can see, Snap-On has listened to us and built an excellent tool that will only improve with time! I did have a couple of error messages pop up on me and did experience a freeup condition when I left it recording, paused the recording, shut off the vehicle for about and hour and then went back to the vehicle. This just proves that Microsoft has a hand in this tool. I love the ability to record as long as you want to, (only limited to hard drive space). recorded a 30 minute drive with close to 10,000 frames of data on my 06 GMC Sierra.
I am a little disapointed in the slow refresh rate when connected to Chryslers. It also apears that even though you can select a custom data list, it does not speed up the pid refersh rate. On the 2003 Ram today the data was recorded around one frame every 3 to 4 seconds. I called the Tech Support and they said there was no fix for this yet. When using the Modis or SP you could select a custom data list and the scanner would only refresh those specific pids. This applies to Fords too.
The ability to print to a network printer, surf the web, order parts, access the IATN, Identifix, Shopkey or anything else you might want is awesome! If you get really bored, you can play solitare or Freecell. I am going to put my customer database and invoice system on this laptop. A larger hard drive would also have been better as I have the entire Alldata DVD library on my current laptop and this would be great when the network is not available. I do some mobile diagnostics and there is not usually access to a network.
Bootup time is acceptable and shutdown is fine too. I set up a bluetooth mouse and I think I will buy a blutooth keyboard to free up the USB port. It could have used two or three. I do intend to install some additional software on the tool such as Autoenginuity and PCM Scan. both use a USB interface adapter and would just possible give you some options when and if there is a communication issue with the Verus software. I didn't see the Legacy software anywhere?
Keep up the good work Snap-On!
I rarely post anything that is negative, but I felt the need to make this video after a very frustrating ordeal with Snap-On over the possible update of a Ve. Expert information integrated in all VERUS® family products, VERDICT® family products, MODIS™ Ultra and SOLUS™ Edge, with a current Snap-on® Software Upgrade. Simply connect the diagnostic tool to Wi-Fi to get Real Fixes and verified parts replacement records.
Snap On Verus Pro Vs Modis Edge
Hello People
Just got my Verus yesterday and had all day to play with it today. As far as I can see, Snap-On has listened to us and built an excellent tool that will only improve with time! I did have a couple of error messages pop up on me and did experience a freeup condition when I left it recording, paused the recording, shut off the vehicle for about and hour and then went back to the vehicle. This just proves that Microsoft has a hand in this tool. I love the ability to record as long as you want to, (only limited to hard drive space). recorded a 30 minute drive with close to 10,000 frames of data on my 06 GMC Sierra.
I am a little disapointed in the slow refresh rate when connected to Chryslers. It also apears that even though you can select a custom data list, it does not speed up the pid refersh rate. On the 2003 Ram today the data was recorded around one frame every 3 to 4 seconds. I called the Tech Support and they said there was no fix for this yet. When using the Modis or SP you could select a custom data list and the scanner would only refresh those specific pids. This applies to Fords too.
The ability to print to a network printer, surf the web, order parts, access the IATN, Identifix, Shopkey or anything else you might want is awesome! If you get really bored, you can play solitare or Freecell. I am going to put my customer database and invoice system on this laptop. A larger hard drive would also have been better as I have the entire Alldata DVD library on my current laptop and this would be great when the network is not available. I do some mobile diagnostics and there is not usually access to a network.
Bootup time is acceptable and shutdown is fine too. I set up a bluetooth mouse and I think I will buy a blutooth keyboard to free up the USB port. It could have used two or three. I do intend to install some additional software on the tool such as Autoenginuity and PCM Scan. both use a USB interface adapter and would just possible give you some options when and if there is a communication issue with the Verus software. I didn't see the Legacy software anywhere?
Keep up the good work Snap-On!
Just got my Verus yesterday and had all day to play with it today. As far as I can see, Snap-On has listened to us and built an excellent tool that will only improve with time! I did have a couple of error messages pop up on me and did experience a freeup condition when I left it recording, paused the recording, shut off the vehicle for about and hour and then went back to the vehicle. This just proves that Microsoft has a hand in this tool. I love the ability to record as long as you want to, (only limited to hard drive space). recorded a 30 minute drive with close to 10,000 frames of data on my 06 GMC Sierra.
I am a little disapointed in the slow refresh rate when connected to Chryslers. It also apears that even though you can select a custom data list, it does not speed up the pid refersh rate. On the 2003 Ram today the data was recorded around one frame every 3 to 4 seconds. I called the Tech Support and they said there was no fix for this yet. When using the Modis or SP you could select a custom data list and the scanner would only refresh those specific pids. This applies to Fords too.
The ability to print to a network printer, surf the web, order parts, access the IATN, Identifix, Shopkey or anything else you might want is awesome! If you get really bored, you can play solitare or Freecell. I am going to put my customer database and invoice system on this laptop. A larger hard drive would also have been better as I have the entire Alldata DVD library on my current laptop and this would be great when the network is not available. I do some mobile diagnostics and there is not usually access to a network.
Bootup time is acceptable and shutdown is fine too. I set up a bluetooth mouse and I think I will buy a blutooth keyboard to free up the USB port. It could have used two or three. I do intend to install some additional software on the tool such as Autoenginuity and PCM Scan. both use a USB interface adapter and would just possible give you some options when and if there is a communication issue with the Verus software. I didn't see the Legacy software anywhere?
Keep up the good work Snap-On!
I rarely post anything that is negative, but I felt the need to make this video after a very frustrating ordeal with Snap-On over the possible update of a Ve. Expert information integrated in all VERUS® family products, VERDICT® family products, MODIS™ Ultra and SOLUS™ Edge, with a current Snap-on® Software Upgrade. Simply connect the diagnostic tool to Wi-Fi to get Real Fixes and verified parts replacement records.
Snap On Verus Pro Vs Modis Edge
Snap On Verus Vs Modis
El chavo wii download pc. Create custom font icons. Diagnostic Tool(s): Modis, Verus Pro, Modis/Solus-Ultra, IQ, EELD500 EVAP Machine Specialty: Diagnostics Support, Snap-on Industrial Division Posts: 1,908.
PK-Power AC Adapter for G-Project G-Boom G-650 G650 Wireless Bluetooth Boombox Speaker; Snap-On MODIS Scanner EEMS300 EESC300 Scan Tool EEMS300F14; Snap-On P/N 2-35466A & EAK0276B02A Power Supply 4.6 out of 5 stars 308. HOW TO Bring a Lawnmower Back From the DEAD. Briggs and Stratton Motor: episode 2 - Duration: 43:50. Jeff's Little Engine Service 446,932 views.
